Check alternatives for Grademark
Check alternatives for Peermark
Ouriginal is a tool to check plagiarism that can be activated for Brightspace Assignments. After setting up an Assignment you can enable Ouriginal to check assignments for plagiarism. Students can submit their written electronic assignments through Brightspace Assignments.
Creating Ouriginal assignments consists of three steps:
- Creating an Assignment.
- Enabling Ouriginal for the Assignment.
- Making the Assignment available to students.
Students can then upload Assignments and view their similarity reports (if enabled).
Setting up Ouriginal
- Create an Assignment. Please take a look at Creating Assignments for more information about how to set up an Assignment.
- Click on Ouriginal in the menu bar of your course (next to Assignments).
- On the Plagiarism Detection Overview you will see an overview of all your assignments. Under Turn On/Off Plagiarism Detection you can enable Plagiarism Detection for your assignment. When the slider is to the right, it is activated for your assignment.
Students are not able to see whether Ouriginal is enabled for an assignment. Please inform them, for example through an announcement.
- Optional: You can also activate Display Similarity Report to Students upon submission, which allows students to view the similarity report of their own submission. Students see the same report as lecturers see in Ouriginal. When a student makes any changes in a report (excluding resources from the similarity report) it will not affect the report of the lecturer and vice versa.
It is important to take note that students must submit their assignments themselves to be able to draw plagiarism reports.
Students can submit the assignment in the relevant course in Brightspace by using the Assignment tool. The student will receive an automated email from Brightspace confirming that submission has been successful.
All uploads will be included to the Ouriginal repository, except for documents uploaded via the Quick submit for teaching staff. For more info, see FAQ section.
- Once logged into Brightspace, select the course that contains the assignment you’d like to view Similarity Reports for.
- From the top navigation bar, select Ouriginal.
- Go to Plagiarism Submission Details. You will see an overview of all the submitted assignments from students. You can also filter on a specific assignment, or search for a specific student, by using the Filters.
- Click on Show Details for the report you want to view. Then click on the name of the document, and click on View Report. A new window will open.
- In the new window you will see an overview of the document, along with document details and the sources of the potential plagiarized material. You can also download the report in PDF format; you can do this on the top right of the page with the download button.
The Analysis overview is the landing page from the Ouriginal report. A summary of the results is presented on this page. It shows the number of text matches and warnings, where these were found in the document and the overall similarity percentage.
- Document Overview Bar: This bar is used to have a quick look at the findings in the document. By clicking on a finding, more details about that specific match or warning will show.
- Findings: This box shows the number of matching texts and warnings (warnings do not affect the similarity score, they show an unusual use of characters in the document).
- Similarity: Two similarities are displayed; the assignment’s aggregated similarity percentage and the receiver’s average similarity. The receivers average can be affected by various reasons, please disregard this score.
- Submission Details: Here you can find all necessary information about the document including the unique submission ID.
- Reset Option: The arrow button will reset the report to its original state (e.g. if you have excluded findings and therefore wish to restore it).
The Findings tab shows the student’s text next to the matched source text. It presents the matches one by one. Use the Entire Document tab to scroll through the entire document.
- Submitted text vs matching text: The text matches are displayed with the submitted student text on the left and the text from the matching source on the right. The percentage refers to the text match for this particular block of text.
- Include/Exclude Finding: If a finding is considered too irrelevant, it is possible to exclude the finding from the report. It will then no longer affect the document’s aggregated similarity.
- Types of findings: Navigate between the different finding types – Matching text, Warnings and the Bin (which is where excluded findings end up).
- Source Info and Link: This is the link to the original source. W meaning website, SA is for a student assignment and J for content from a journal.
- View alternatives: Ouriginal shows matches that the algorithm deems most relevant. It is possible to show alternative matches in the findings tab.
The Sources tab shows the list of all original sources found in Ouriginal’s analysis.. Next to the source, you find the number of alternative overlapping sources found by Ouriginal. In the sources tab it is possible to Exclude a Source or switch to an alternative source. It is also possible to report a missing source URL to Ouriginal, a request to index this source is then send to Ouriginal.
Entire Document Tab
The submitted document is shown in its entirety here. Coloured parts of the document indicate matching text or warnings. Orange means matching text and purple means a warning. Click on the Finding icon left from the text to open a side-by-side comparison.
Ouriginal Quick Submit for Teaching Staff
Ouriginal Quick Submit is a tool for Teaching staff to be able to use Ouriginal without having to set up Ouriginal within a Brightspace course. This can be useful when only 1 or 2 documents need to be submitted. As teaching staff, however, you will have to manually upload all assignments one by one, which is why it is recommended to set up Ouriginal within your own course when dealing with large numbers of assignments.
It takes up to 30 minutes to see the similarity report after uploading the assignment. Afterwards the report can be viewed by selecting Ouriginal and then Plagiarism Submission Details.
All Teaching Staff with a TU Delft employee account (@tudelft.nl) can gain access to the Ouriginal Quick Submit for Teaching Staff – course.
- Go to the Catalog via the Brightspace Homepage.
- Search for Ouriginal Quick Submit for Teaching Staff.
- Select Request Approval.
- Approval will be given manually by Brightspace support, this can take some time.
When encountering problems, please contact Brightspace support.
For using Quick Submit a guide can also be found within the course under Content > [Ouriginal Quick Submit]
If you wish to use Safari (Mac OS) with Ouriginal, you must configure the browser preferences as outlined below.
- Open Safari
- Click the Safari menu and select Preferences.
- Click the Privacy tab.
- Uncheck the Prevent cross-site tracking box AND uncheck the Block all cookies.
(Both of these preferences must be disabled if you want to use Safari with Ouriginal.)
- Close the Safari Preferences window and refresh or restart your browser.
Ouriginal unfortunately doesn’t index the type of sources. If Ouriginal found a tertiary source first, it will show this source instead of a primary source. You can switch from the ‘new Ouriginal’ to the ‘old’ view, where you can see a complete list of sources that were found in the document. You can do this by clicking the button on the top right of the page.
The Ouriginal algorithm searches for the least sources with the highest similarity. For example, a similar text can be found on the same Wikipedia page, but it can also be found in three different journals. Ouriginal will then show the Wikipedia page as level 1, since it has the most similar text but the least different sources; and show the three different journal pages as level 2, since it also has similar text but multiple sources.
Unfortunately Ouriginal has access to less journals as you may have grown to expect from using TurnitIn. Ouriginal is working on expanding sources as much as possible.
You can submit an URL in Ouriginal via the link in the plagiarism report under sources. It will take approximately a week before the URL is indexed, after that the document can be resubmitted for an up to date plagiarism scan.
No, unfortunately this is not possible.
The size limit for documents is 200MB. The file formats that are supported by Ouriginal are currently: .doc, .docx, .xls, .xlsx, .sxw, .pptx, .pdf, .pdf2.0, .txt, .rtf, .html, .htm, .wps, .odt, .odp, .ods, .tif, .tiff, .ps, .hwp and .pages.
Unfortunately this is not possible in Ouriginal. It is possible to exclude the source from the scan, however if the source is also used outside of quoted text, this would then also be excluded from the report.
Unfortunately this is not possible. You can however exclude certain sources in the plagiarism report.
The Ouriginal database of content comes from three different sources: the World Wide Web, published materials, and previously submitted student materials. All materials previously submitted to the TU Delft via Turnitin have been submitted to the Ouriginal database.
This would mean that the work is copied from protected student’s work, and can therefore not be accessed by us. You can look at the name and source data to see whether the document is from TU Delft or from another organisation.
Ouriginal does not recognize pictures, links (copied or shared), videos, scanned documents, or protected files. Latex code will have to be converted to flat text before it can be recognized by Ouriginal. Because of the complicated nature of Latex, it is strongly recommended to convert this yourself, or not use Ouriginal at all.
This is not possible unfortunately.
It will only change the way you see the comparison, it will not affect the similarity score.
Due to the GDPR (AVG) the share button is disabled in all Ouriginal reports for the TU Delft.
A student cannot commit self-plagiarism if they submit a document several times in an assignment created by the same instructor. However, self-plagiarism is committed when a student submits the same (or updated) document to an assignment created by another instructor; regardless in which course the assignment is given. In such cases, the receiver (instructor) can choose to exclude a source using the “Sources” tab in the relevant report so that it is not considered plagiarism.